|
Maytag Twin Cylinder Engine 1937-52
|
|---|
|
PART NO. |
DESCRIPTION |
PRICE |
CONDITION |
| LECLR001 |
MUFFLER FOR GENERATORS OR PUMPS BALL LECLAIR |
$25.00 |
REPRO |
| LECLR002 |
STARTER PULLEY FOR MOWERS, GEN., PUMPS, ETC |
CALL |
REPRO |
| 53116-X |
1/4" x 5/16" SET SCREW HOL HD. ASS 3957 TO 14454 3-REQ |
$0.25 |
USED |
| 54045-X |
#12-24 x 1/2 " MACH SCREW FLAT HD TO BREAKER PLATE 1-REQ |
$0.20 |
USED |
| 54050-X |
#12-24 x 1-1/8" SCREW FIL HD. FOR COIL TO PLATE 2-REQ |
$0.20 |
USED |
| 54110-X |
1/4" x 5/8" MACH SCREW FIL HD. S 304 TO S 299 4-REQ |
$0.25 |
USED |
| 54855-X |
1/4" x 1/16" x 1/16" SPLIT LOCK WASHER ON 54110-X 4-REQ |
$0.05 |
USED |
| 54859-X |
1/4" x 1/8" x 1/16" SPLIT LOCK WASHER ON 51162-X 4-REQ |
$0.05 |
USED |
| 54864-X |
5/16" SPLIT LOCK WASHER ON 51337-X 3-REQ |
$0.05 |
USED |
| 54880-X |
1/2 " x 11/64" x 1/16" SPLIT LOCK WASHER ON S 301 1-REQ |
$0.05 |
USED |
57966-X |
BLACK WRINKLE PAINT (11OZ) SPRAY CAN WT. 1
LBS.
CANNOT BE SHIPPED. CAN BE PICKED UP AT SHOWS. |
$7.00 |
NEW |
| |
|
|
|
|
Multi-Motor Type (E) Mixer For 82 and Upright 1/2 Hp |
|---|
| PART NO. |
DESCRIPTION |
PRICE |
CONDITION |
| S134-1 |
VAPOR NOZZLE (SUB TO S159-1) |
$16.50 |
REPRO |
| S135-C |
CHECK BALL IN MIXER CHROME PLATED |
$0.25 |
NEW |
| S135-B |
CHECK BALL IN MIXER BRONZE BALL |
$0.50 |
NEW |
| S136-1 |
CHECK BALL PLUG FOR TYPE (E) MIXER. CAP W/BALL. |
$4.00 |
REPRO |
| S137-1 |
AIR VALVE CAP FOR TYPE (E) MIXER
|
$12.00 |
REPRO |
| S139-1 |
AIR CHECK VALVE FOR TYPE (E) MIXER |
$6.00 |
REPRO |
| S140-1 |
AIR ADJUSTMENT CAP AND ROD IN CARBURETOR |
$40.00 |
REPRO |
| S141 |
WASHER FOR FEED TUBE |
N/A |
USED |
| S159-1 |
VAPOR NOZZLE |
$16.50 |
REPRO |
| S160 |
BUSHING FOR S159 VAPOR NOZZLE GO TO
(SEE S160-61-1) |
|
REPRO |
S161 |
STUFFING BOX FOR S159 AND S160 GO TO (SEE 160-61-1) |
|
REPRO |
| S160-61-1 |
BUSHING AND STUFFING BOX or Gland Nut & Union |
$10.00 |
REPRO |
| ASS2909-1 |
ADJUSTABLE VAPOR NOZZLE ASSEMBLY,S159,S160,S161 |
$26.00 |
REPRO |
| 6753 |
Spring for Air Valve in Carburetor |
$3.00 |
REPRO |
| |
|
|
|
|
Maytag Model 82 Multi-Motor built 1922-27 |
|---|
|
PART NO. |
DESCRIPTION |
PRICE |
CONDITION |
| GS82 |
GASKET SET |
$18.00 |
REPRO |
| S110 |
RING SET STANDARD |
$11.00 |
NEW |
| S173 |
CRANKSHAFT FOR MAGNETO (NEED MEASUREMENTS) |
$20.00 |
USED, CALL, #3 |
| S176-1 |
FEED PIPE WITH STRAINER 2-5/8" (OVER ALL) |
$18.00 |
REPRO |
| S182 |
DEFLOODER IN BOTTOM OF CRANKCASE |
$9.00 |
REPRO |
| S183 |
FLYWHEEL HOUSING ONLY |
$25.00 |
CALL/USED |
| S188 |
COLLAR FOR FELT WASHER NEED ASSEMBLY |
$15.00 |
CALL/USED |
| S189-1 |
COVER FOR INSPECTION HOLE |
$15.00 |
REPRO |
| S190 |
MOUNTING PLATE ONLY S 656 |
$15.00 |
USED |
| S191 |
GOVERNOR ARM |
$25.00 |
USED |
| S204 |
CYLINDER HEAD 3/4 HP 7 LBS |
$7.50 |
REC |
| S204-1 |
CYLINDER HEAD 3/4 HP FINISHED 7 LBS |
$15.00 |
REC |
| S205 |
PISTON FOR 3/4 HP 1 LBS |
$50.00 |
USED |
| S207 |
CONNECTING ROD FOR 3/4 HP 1 LB |
$20.00 |
USED#3 |
| S207-1 |
CONNECTING ROD FOR 3/4 HP 1 LB |
$50.00 |
REPRO |
| S214 |
CRANKCASE FOR 3/4 HP 4 LBS |
$12.00 |
REC |
| S215 |
COVER FOR FUEL TANK 4 LBS |
$20.00 |
REC |
| S216 |
FUEL TANK FOR 3/4 HP (RARE) |
N/A |
USED |
| S217-1 |
FEED TUBE WITH STRAINER 3-3/4" OVERALL |
$16.50 |
REPRO |
| S220 |
CRANKCASE BEARING NO GREASE LUBRICATOR |
$45.00 |
USED,CALL |
| S223 |
FUEL TANK LONG BASE 3/4 HP |
$100.00 |
CALL/USED |
| S224-1 |
BALL MUFFLER CAST IRON |
N/A |
REPRO |
| S224-1AL |
BALL MUFFLER CAST ALUMINUM |
N/A |
REPRO |
| S226 |
COUPLING DISC FOR MAGNETO |
$30.00 |
CALL |
| S227 |
COVER FOR FUEL TANK |
$25.00 |
USED |
| S230-1 |
FLANGED TERMINAL FOR EXHAUST HOSE, (BLANK CAST)
|
$15.00 |
REPRO#3 |
| 6290-1 |
GASKET FOR CARBURETOR |
$1.75 |
REPRO |
| 6352 |
FLEXIBLE TUBE FOR EXHAUST HOSE |
N/A |
USED |
| 6509-1 |
GASKET FOR CRANKCASE BEARING |
$4.00 |
REPRO |
| 6753 |
SPRING FOR AIR VALVE IN CARBURETOR |
$3.00 |
REPRO |
| 6831 |
NUT FOR CRANKSHAFT |
$1.00 |
USED |
| 6831-1 |
NUT FOR CRANKSHAFT |
$2.00 |
NEW |
6993 |
FIBER WASHER 1" I.D. X 1-9/32 O.D. FOR CRANKSHAFT |
N/A |
USED |
| 12049 |
FELT WASHER FOR CRANKSHAFT |
N/A |
USED |
| 12112 |
SPARK PLUG CABLE ONLY 16" ORANGE BRAIDED WIRE |
$1.35 |
REPRO |
| 12112-1 |
IGNITION LEAD ORANGE 7mm WITH STEEL CLIP 16" |
$2.00 |
REPRO |
| 12112-2 |
IGNITION LEAD ORANGE 7mm WITH BRASS CLIP/EYE 16" |
$2.50 |
REPRO |
| 12121 |
WOODRUFF KEY FOR CRANKSHAFT |
$0.25 |
USED |
| 12121-1 |
WOODRUFF KEY FOR CRANKSHAFT |
$0.50 |
NEW |
| 12285-1 |
GASKET FOR CYLINDER AND CRANKCASE 1-REQ |
$3.00 |
REPRO |
| 12286 |
GASKET FOR CYLINDER AND EXHAUST HOSE (COPPER) 1-REQ |
$2.00 |
USED |
| 12286-1 |
GASKET FOR CYLINDER AND EXHAUST HOSE 1-REQ |
$3.00 |
REPRO |
| 12287 |
WRIST PIN 7/16 x 2-5/16" |
$5.00 |
USED |
| 12407-1 |
GASKET FOR FUEL TANK 1-REQ |
$4.00 |
REPRO |
| 12412-1 |
GASKET FOR CRANKCASE AND COVER 1-REQ |
$3.00 |
REPRO |
| 12592-1 |
GROUND STRAP |
$2.50 |
REPRO |
| 12593-1 |
GROUNDING PULL WIRE |
$2.50 |
REPRO |
| 12592-3 |
SPRING SWITCH AND ROD ASSY |
$5.00 |
REPRO |
| 12747 |
TIMER PLATE FOR MAGNETO |
$7.50 |
USED/CALL |
| 12747-1 |
TIMER PLATE FOR MAGNETO |
$8.00 |
REPRO |
| 12751 |
HIGH TENSION PLUG FOR WIRE |
$10.00 |
CALL/USED |
| 12751-1 |
HIGH TENSION PLUG FOR WIRE |
$20.00 |
REPRO |
| 12844-1 |
GUIDE FOR SWITCH ROD |
$5.00 |
REPRO |
| 14028 |
GREASE CUP NO. MALE 1/8" THREAD |
N/A |
USED |
| 14037 |
3/8" PIPE PLUG |
$0.25 |
USED |
| CHP #25 |
CHAMPION PLUG |
$12.00 |
USED |
| 3095 AUTOLITE |
AUTOLITE SAME HEET RANGE AS CHAMPION PLUG #25
|
$6.00 |
NEW |
| ASS2599 |
FLYWHEEL ASSEMBLY
|
$80.00 |
USED |
| ASS2752-1 |
MAG STATOR PLATE ASSEMBLY FULLY RESTORED |
$150.00 |
RECON, USED |
| ASS2753-1 |
BREAKER ASSEMBLY ( $10.00 CORE EXCHANGE) |
$20.00 |
RECON, USED |
| ASS2754 |
CONDENSER SUB TO ASS4009-1
|
$10.50 |
NEW |
| ASS3177 |
BOSCH COIL ASSEMBLY TEST HOT
|
$50.00 |
USED |
| ASS3177-1 |
BOSCH COIL ASSEMBLY NEW WINDING HOT
|
$85.00 |
REBUILT |
| ASS2908-1 |
STRAINER CHECK VALVE BALL TYPE |
$9.00 |
REPRO |
| K946-1AL82 |
FLAT BELT PULLEY CAST ALUMINUM |
$40.00 |
REPRO |
| K946-CI82 |
FLAT BELT PULLEY CAST IRON OEM |
$70.00 |
REPRO |
| K946 |
FLAT BELT PULLEY OEM |
$80.00 |
USED/ CALL |
| TUBEGAS |
GAS PICK UP TUBE 3-1/2" LONG |
$8.40 |
REPRO |
